• WELDING   • FABRICATING   • CNC MILLING   • STRUCTURAL STEEL

QUALITY SPECIALISTS  Ranburne Steel Fabrication, Inc. strives to provide you with the kind of quality assurance you deserve. Our specialists share a common goal centered around you, our valued customer.

When you put your trust in Ranburne Steel Fabrication, Inc. for all your Fabrication/Structural Steel needs, you can rest easy knowing that our team will come together to see that your needs are given our full attention. Below you will find brief descriptions of the types of machining we are capable of. For more information, please contact us directly by phone, fax, or email. Any of our professionals will be able to assist you in learning of our abilities to serve you.

CNC MACHINING
At Ranburne Steel Fabrication, Inc.  our CNC milling machines include 4020 Fadal:

• Table Size: 20" F-B x 48" L-R
• Travels: 40" X, 20" Y & 20" Z
• Spindle Speeds: 10 to 10,000 RPM
• Spindle Taper: Cat 40
• Distance Spindle to Table: 4" Minimum to 24" Maximum
• 21-Position Automatic Tool Changer
• Center of Spindle Back to Column: 20"
• Maximum Table Load Capacity: 3,641 Lbs.
• Cutting Feed Rates: .01 to 400 IPM -- 600 IPM at 150 Percent
• Rapid Traverse Rates: 900 IPM on X & Y -- 700 IPM on Z
• Fadal 88 CNC Control with RS232 Port
• Modem Jack
• Auto Lube System
• Flood Coolant
• 15 HP Motor, Wired 3 Phase, 60 Cycle, 230-460 Volts
• (2) Pallet, Pallet Shuttle System with 19" x 42-7/8" Aluminum Pallets
• Overall Size without Pallet Shuttle System: 124" L-R x 102" F-B x 106" H
• Overall Size with Pallet System: 164" L-R

We also have the 5020 shown to the right. It has much the same capabities as the 4020 with a few stepped-up features including a larger table size and travel capacity. This capability easily accomodates most all milling needs.  Ranburne Steel Fabrication, Inc. takes great pride in our office-to-shop collaboration. This allows us the confidence to provide the best service, ensuring the trust and repeat business of our customers.




Peddinghaus Beam Drill Line

Maximum Beam Width	44" 1100 mm	50" 1270 mm
Maximum Flange Height	18" 460 mm	24" 609.6 mm
Maximum Diameter	1-9/16" 40 mm	2" 50.8 mm

We also have a 110 Ton Beam Punch Line

Ranburne Steel Fabrication, Inc. utilizes state-of-the-art fabricating techniques to serve you better. Our professional engineering/fabricating staff is dedicated to every aspect of your project. As our testimonials show, we are here to help you and will always give 100% to ensure a timely and productive project schedule.

CNC PLASMA BURNING TABLE
PlatePro Model 2000 Cutting Machine By KOIKE ARONSON, INC.

PlatePro Standard R/H Cut Features:

Structural Tube cross beam with rear delta bracing for increased rigidity.

38" Drive Saddle with fore/aft side guide rollers and rack and pinion drive for precise motion.

Fully Captured Master Carriage with rack and pinion drive for precise motion on replaceable round ways on the X-Axis cross beam. Endless loop steel band for fully captured slave carriages.

Koike Aronson Inc. Servo Drive Package, 4 to 600 IPM

X and Y-Axis Cable Carriers for torch hose and cable control.

Effective cutting width: 72 inches

Inherent parking area for two slave torch stations allows full cutting width

for master carriage.

AC Servo X and Y-Axis Motors and Interface Cables

Input power: 115v, 50-60 hz, single phase, 15 amp (machine drive only)

Ranburne Steel Fabrication, Inc. has the capabilities to handle most any fabrication/structural steel project. We can do small tonnage jobs to over 1,000 ton jobs. Please call today to speak with us about how we can help you grow your business by meeting deadlines and time constraints. Let us help you produce high-quality results that will speak for themselves.

ABOUT US | CONTACT US | PROJECTS | TESTIMONIALS